160W LED Bowfishing Light
Gradually adjust an improved output of 20,000+ lumens from warm white to cool white to increase visibility in clear or muddy water.
One light is compatible with battery (24V DC only) or generator (110V/120V AC)
Low profile housing design | 12" long, 6" tall, 3" deep
Re-engineered reflector casts a wide flood pattern seen in conventional large flood lights with the sought-after low profile housing that takes up minimal deck space.
Compatible with ALL-NEW Building Block Wire Harness to control multiple lights by one dial. No permanent customizations required.
PRE-ORDER AVAILABLE ONLY - STARTS SHIPPING IN MID-FEBRUARY
The 160W Swamp Eye® HD Bowfishing Light is the next generation of our game-changing color tone adjustable lights. We built this light from the ground up; with a focus on maximizing brightness, maintaining color-tone adjustability, and minimizing power draw.
Re-Engineered from the Ground Up
To accomplish our goal, we had to start from scratch and build from the ground up. We utilize premium high lumen-per-watt LEDs, and completely re-engineered the power distribution and controls from our Swamp Eye® Light Bar to allow for nearly 99% efficiency in terms of turning power into brightness. Most bowfishing lights have efficiencies ranging from 40% to 85% on the high end, the 160W Swamp Eye® HD Bowfishing Light is 99% efficient. These high efficiencies make the light output comparable to most 200+ watt lights.
Adjust on the Fly for Clear or Muddy Water
Our innovative Swamp Eye® series of lights are the first purpose-built flounder gigging and bowfishing lights that can adjust from an HPS-like warm white color (2000k) to a halogen-like cool white color (6000k) in an instant.
These features are one of many reasons you see commercial fishermen, tournament fishermen, professional guides, and State Natural Resource Departments rely on our Swamp Eye® Lights.
Building Block Wire Harness
The building block wire harness is made of a waterproof plug and play system that makes wiring a breeze. You can forget about the days of crimping and soldering wires, this system is user friendly and easy to adjust in the middle of the night.
Turns connected lights on and off, adjusts color tone from warm white to cool white. Each light comes standard with 1 control dial. Additional dials are sold separately.
Control Dial Extension Lead
Use these to put the control dial wherever you want, or space your lights however far apart you want. This item is sold separately.
Tee Connector for Control Dial
Used for connecting multiple lights to one single control dial. This item is sold separately.
Power Cord Extension Lead
Easily extend the power cord of the lights with these, making mounting and wiring much easier. This item is sold separately.
Power Cord Lead with Battery Terminals
Planning to run on 24V DC batteries? Includes a power cord lead wire with waterproof plug on one end and battery terminal ends on the other, making it quick and easy to switch from battery to generator. This item is sold separately.
Power Draw (per light):
Amp Draw (per light):
24V DC Battery - 6.67 Amps
120V Generator - 1.33 Amps
Dimensions, Excluding Mounting Bracket:
12" Wide, 6" Tall, 3" Deep
Dimensions, Including Mounting Bracket:
12" Wide, 6.75" Tall, 3" Deep
5 lb 5 oz
Estimated Battery Run Time:
Varies depending on amp hour capacity of your battery.
If using a 24V DC battery, divide the amp hour capacity by the 24V amp draw for an estimated run time.
Example: For a 50 Ah 24V Battery, 50 Amp-hours / 6.67 Amps = 7.5 hours Run Time
If using 2x 12V batteries in series, the amp hour capacity of each battery will be added and then divided by 2. The resulting amp hour capacity will be divided by the amp draw to determine the run time of the light.
Example: For 2x 12V 100 Amp Hour Deep Cycle Batteries:
(100 Amp-hours, 12V + 100 Amp-hours, 12V) / 2 = 100 Amp-hours, 24V
100 Amp-Hours / 6.67 Amps = 15 hours Run Time (typical run time for most deep cycle batteries)