Flounder Gigging

The Guide to Buying the Best Flounder Gig For Sale

Flounder Gigs are the most critical tool in the entire flounder gigging and fish-gigging setup. Your gig is the difference between landing fish consistently or watching them slip off the prongs and disappear into the dark. This guide breaks down the exact features that matter most — strength, corrosion resistance, sharpness, retention, and size — and explains why the Outrigger Outdoors 3 Prong and 5 Prong Flounder Gigs continue to lead the industry as the strongest, sharpest, and most reliable fish gigs available today. Whether you are gigging flounder, sheepshead, gar, drum, carp, suckers, bowfin, bullhead, catfish, or frogs, choosing a premium-grade fish gig is the fastest way to improve your success rate. A poorly made gig bends, dulls, rusts, or loses fish — while a properly engineered stainless steel gig remains sharp, strong, and reliable trip after trip. 5 Tips to Buy the Best Flounder Gig (What Actually Matters) 1. Strength & Durability The most overlooked factor that separates a quality gig from a cheap one is structural strength. A gig should be a uniform, solid piece — welded or machined as a single body — that can withstand saltwater abuse and even be used to pole or push a flounder boat. Watch out for: Thin sheet-metal housings with tines tack welded on Screw-on threaded heads that seize, strip, or break in saltwater Gigs that bend under pressure when pushing off shallow flats Outrigger Outdoors gigs are engineered as solid, single-piece stainless steel tools designed for real-world abuse — including pushing off mud banks, sandbars, or oyster flats while on the boat. 2. Corrosion Resistance (316 Stainless Steel or Better) Flounder gigging is done in some of the saltiest, most corrosive water on the Gulf Coast. If your gig is not made from a premium corrosion-proof alloy, it will rust after one or two trips. The best flounder gigs are made from 316 stainless steel, titanium, or tungsten carbide. Avoid 304 or 308 “budget stainless” — they rust quickly and weaken under salt exposure. Powder-coated steel is not suitable for gigging; the coating scrapes off on the first flounder. Outrigger Outdoors 3 Prong and 5 Prong Gigs are crafted from pure 316 stainless steel — the same grade used in high-end marine applications and commercial kitchens. This prevents rust, corrosion, metal flaking, and contamination of fillets. 3. Sharpness (Penetration Matters) Your gig must remain razor sharp after hitting sand, shell, gravel, and rock bottoms. A dull gig causes fish to slip away before you can secure them. Sharp tines ensure fast penetration. Corrosion-resistant metal stays sharp longer. Every Outrigger Outdoors gig ships pre-sharpened for maximum penetration and long-term performance. 4. Fish Retention (Do Not Lose the Fish!) Landing the fish is just as important as sticking it. Poor retention results in heartbreak as fish flop off the gig. Look out for: Tiny hook-style barbs that provide only one point of contact Oversized barbs that destroy fillets when removing the fish The Outrigger Outdoors retention system solves both issues by using a 360-degree retention barb that securely holds the fish without damaging excessive meat. It is widely recognized as the most effective and balanced design available. 5. Size & Prong Spacing A gig that is too narrow makes it easier to miss. One that is too wide becomes bulky and slow to maneuver. The ideal gig: Is similar in width to a flounder’s body Has prongs spaced to ensure at least 2 points of contact on any fish Offers fast, controlled stabbing Outrigger’s 3 Prong and 5 Prong models both follow the perfect width-to-control ratio for maximum efficiency. The Best Flounder Gigs: Outrigger Outdoors 3 Prong & 5 Prong After testing every major gig style on the market — stainless, powder-coated, threaded-head, barbed, and barbless — the clear winners are the: Outrigger Outdoors 3 Prong Flounder Gig Outrigger Outdoors 5 Prong Flounder Gig Why These Are the Best Fish Gigs / Fish Spears Available Today 100% solid 316 stainless steel – corrosion-proof and built for saltwater abuse Pre-sharpened tines – for instant penetration on flounder, drum, sheepshead, gar, carp, and more 360° retention barbs – holds fish securely without tearing fillets apart Three- or five-prong options – choose maneuverability (3-prong) or maximum coverage (5-prong) No screws, no threads, no weak points – a single, solid unit for lifetime use Perfect width and spacing for gigging in shallow and clear or muddy water Tournament giggers, commercial fishermen, and everyday recreational flounder giggers consistently choose these gigs because they simply do not fail. Choosing Between the 3 Prong vs 5 Prong Gig 3 Prong Gig – Better for wading, tighter maneuvering, fast strikes, and beginners. Extremely accurate. 5 Prong Gig – Ideal for boat gigging, larger fish, murky water, and maximum holding power. Many serious giggers carry both styles depending on conditions. Why Outrigger Outdoors Gigs Are the #1 Choice for Flounder Gigging Outrigger Outdoors was founded on its flagship 3-Prong and 5-Prong Flounder Gigs. Before lighting systems, adapters, and accessories, these gigs were the backbone of the company — and they remain industry leaders today. Backed by years of real-world testing in Texas, Louisiana, Florida, Alabama, and the Carolinas, these gigs have earned a reputation for being the strongest, sharpest, and most reliable flounder gigs at an equally competitive price point. Add a Fish Rake in your cooler or fish box to instantly remove fish from the gig without bending prongs or tearing fillets.